OurJZMF-BB replacement neck for Jazzmaster is officially licensed by Fender and made to exacting quality standards in Japan. Offeringblackblock inlays and ablack bound fretboard the JZMF-BB is one of our morechoice neck offerings. Featuring 21 vintage frets a 10" fretboard radius and a tinted polyurethane finish this Jazzmaster neck is ready to compliment your instrument and give it that high-end deluxe look and feel

Specifications

• Scale Length: 25.5"
• Neck Profile Shape: C
• Frets: 21Vintage frets .079" x .043"
• Wood:1-piece Maple with bound fretboard
• Finish:Tinted Polyurethane
• Fretboard Radius: 10"
• Inlays:Black Blocks with white side marker dots. Black fretboard binding
• Nut Width: 1-5/8"
• Heel Width: 2-3/16"
• Heel Shape: Round
• Tuning Peg Holes: Vintage 2-step hole
• 0.34" 8.5mm bushing-hole diameter
• 0.25" 6.5mm post-hole diameter
• Truss Rod Adjustment Location: Headstock
• Neck Thickness:
• 0.88" at first fret
• 0.98" at twelfth fret

Important Notes

• Wood grain varies from neck to neck. Your neck may differ slightly from what is pictured.
• All necks have a limited lifetime warranty against defects in materials and workmanship.
• All necks may require fret leveling and polish. This is normal and not a defect.
• To protect against the effects of moisture we recommend sealing unfinished necks prior to installation.
• This neck is licensed to Allparts Music Corporation by Fender Musical Instruments under a quality control trademark license. Allparts Music Corporation is not affiliated with Fender and no Fender warranty applies.