ギターネック
ベースネック
ギターボディ
ベースボディ
軽量ローストボディ


  
Allparts Select quotLicensed by Fenderquot Quarter Sawn Roasted Maple quotVIN-MODquot Replacement Neck for Jazzmaster - Unfinished

SKU : JZMO-RQ


仕様 :

Allparts Select

Allparts Select represents the very best Allparts has to offer in terms of quality features and exclusivity. Produced in limited batches using only the finest materials our Select series replacement necks offer compelling combinations of highly desirable specifications and high-end appointments.

Model Overview

Officially licensed by Fender and made to exacting quality standards in Japan using quartersawn roasted maple this Select series Vin-Mod neck offers Jazzmaster fans a compelling blend of vintage and modern specs. With truss rod adjustment at the heel and 2-step vintage tuning key holes this neck maintains a classic aesthetic. Combined with a flatter modern 10 fretboard radius and 21 tall/narrow frets players can expect enhanced comfort easier string bending and a "best of both worlds" playing experience. Unfinished but spray-ready this beauty is ready for your preferred finish.

Dont Let Unfinished Necks Fool You

Why Quartersawn and Roasted?

Quartersawn wood blanks offer enhanced stability vs. the flatsawn neck blanks most necks are manufactured from. Roasting the wood further enhances stability by reducing the moisture content down to around 7. The result is a more-resonant neck thats stronger and less susceptible to changing weather conditions.

Features and Specifications:

  • Series: VIN-MOD = Blend of Vintage and Modern Specs.
  • Scale Length: 25.5"
  • Neck Profile Shape: C
  • Frets: 21tall/narrow .079" x .055"
  • Wood: 1-piece quartersawn maple
  • Finish: Unfinished
  • Fretboard Radius: 10"
  • Inlays:Black fretboard and side dots
  • Nut Width: 1-5/8"
  • Heel Width: 2-3/16"
  • Heel Shape: Round
  • Tuning Peg Holes: Vintage 2-step hole
    • 0.34" 8.5mm bushing-hole diameter
    • 0.25" 6.5mm post-hole diameter
  • Truss Rod Adjustment Location: Heel
  • Neck Thickness:
    • 0.88" at first fret
    • 0.98" at twelfth fret

Important Notes
  • Wood grain varies from neck to neck. Your neck may differ slightly from what is pictured.
  • All necks have a limited lifetime warranty against defects in materials and workmanship.
  • All necks may require fret leveling and polish. This is normal and not a defect.
  • To protect against the effects of moisture we recommend sealing unfinished necks prior to installation.
  • This neck is licensed to Allparts Music Corporation by Fender Musical Instruments under a quality control trademark license. Allparts Music Corporation is not affiliated with Fender and no Fender warranty applies.


    

価格 : 52900円



TCTGP工房によるネックの塗装

(オイルfinish以外の塗装は全てラッカー塗装になります)
YSWエイジド加工とは?

送料の目安 :
6800円 から 8800円くらい (ギターネック1本の場合)
9400円 から 11400円くらい (ギターボディ1個の場合)
実際には箱の大きさや重さによって変わる事があります。
消費税、地方税、関税は送料も合計した金額の10%くらいになるのが普通です(でも不思議な事に何故か0円になる時もあります。どういう規則&オペレーション??)